WHITESITES BLOG PHOTOS PLACES POPULAR CATEGORIES

Entertainment

How to Repair a PS3 with blinking lights

Dec 19, 2011 by Paul White

Recently my PS3 stopped working.  After searching around, I found that the problem was due to bad solder connections between the GPU and the Board.  This would cause it to flash red and or yellow lights when you hit the power button.  It would not boot up.  Some people use a hair dryer to remelt their chips into the board, but this is only a temporary fix if you are lucky.  I wanted to fix it for good, so I sent my PS3 off to SpitFireMods for repair.  The purpose of this article is to share some experiences with other PS3 owners who are considering having their PS3 repaired. 
Read
2 Comments
683 Visitors
1098 Views

What is the best NYE Party in Houston

Dec 16, 2011 by Paul White

Houston NYE Parties 2011 2012New Years Eve is coming up, and this means you have one last time to party.  There are a lot of parties to choose from.  If you are looking for your average party with some people watching, some small talk, and a mid night toast, then you can find a decent party by walking into just about any bar.   But if you want a truely wild experience, then join desirous party.  There are lots of NYE Parties in Houston, none will party this hard.

Guys this is a couples and Ladies only event.  If you want to attend bring a date.  Visit Desirous Party for Details

Read
358 Visitors
956 Views

The Wildest Halloween Party in Houston for 2011

Oct 6, 2011 by Paul White

Houston Halloween Party at the RitzSo Halloween is upon us.  For those of you guys who are not in the lifestyle, this likely means that your wife or girlfriend has agreed to be seen in public this one time dressed like a fetish stripper all in the name of Halloween.  This is a special night guys.  This is not the night to take her to a typical party where every single male will likely giver her plenty of unwanted sexual harassment. This is likley to turn her off, and quickly destroy every hope you had of fulling your fantasy of doing your girl in that outfit at the end of the night.  If you want the wildest ( yet respectful ) Halloween Party in Houston( For Couples ), then attend the Halloween party at the Ritz Cabaret.  Many people might be curious as to how wild this party will get, so I have put together a small QNA to help address some of the concerns.

If you already know you want to be part of the Wildest Halloween Party in Houston, check out the Desirousparty website.

Read
727 Visitors
1165 Views

SDE Lighting 60 watt LED Intelligent DMX Scanner Review

Mar 3, 2011 by Paul White

60 Watt LED Intelligent DMX Mirror ScannerIf you manage the Intelligent lights at a club or run a mobile DJ rig, you have likely spent more hours up on ladders changing bulbs than you want to admit.  You thought why has nobody taken a High power LED and put it in a mirror based scanner?  Well my friends the time has come!  A new company SDE Lighting has finally built the fixture we have all dreamed of!  Read this for the full detailed specs.  Don't waste another penny with American DJ, Chauvet, High End or Martin.  The guys at SDE Lighting have made an 60 watt LED Intelligent Scanner, and priced it at about $325.
Read
18 Comments
1781 Visitors
3259 Views

Upgrading the fan in your DMX Intelligent Lighting Fixtures

Jan 28, 2011 by Paul White

The title should be pretty self explanatory.  We have 16 Mighty Scan fixtures.  These fixtures have the fans mounted on the outside of the body. which makes changing them very easy.  After some observations I concluded that the stock OEM fans are crap.  So I decided to upgrade the fan to something with a little more beef.

Read
332 Visitors
780 Views

Venue Scan 250 vs American DJ Scan 250EX

Jan 5, 2011 by Paul White

Venue Scan 250American DJ Dj Scan 250EXRecently I bought 2 pairs of Fixtures for my client.  Let me just start by saying that when it comes to low cost DMX controlled Moving Mirror Scanners, no two fixtures are alike.  Each Fixture has its own set of strengths and weaknesses.  What is important is to find the fixture that best suites your needs.

Read
3 Comments
1088 Visitors
1907 Views

IColor Accents at Hush Night Club

Jan 5, 2011 by Paul White

When discussing the light and sound setup at Hush NightClub with Dan Deschamps, I was kind of shocked to hear the millions they spent on Lighting.  After some research its easy to see where a lot of this money went.  IColor Accents.  They had several hundred of these mounted on a truss.  To put this into perspective the retail on these is around $482 per 2 foot segiment.  Keep in mind Hush was built back in 2004, and these probably cost even more back then.
Read
290 Visitors
717 Views

Hottest New Years Eve Houston Party 2010 2011

Dec 14, 2010 by Paul White

If you want to celebrate the New Year like a rockstar, then you might want to consider the Desirous Party Houston New Years Eve Party at the Ritz.  On this special night the Ritz is kicking out the Strippers, and letting Desirous Party take over the entire club ( VIP and all ).  Full event details inside

Read
836 Visitors
1610 Views

Everything you every wanted to know about Hush NightClub

Dec 8, 2010 by Paul White

I got the chance to sit down with Dan DesChamps and ask him some questions about Hush.  Dan and Kevin were the original founder and owner of the nightclub in 2004.  Here are some of the questions I asked with his answers.



Read
377 Visitors
934 Views

upgrading Mighty Scan Intelligent Lighting to LED Bulbs

Dec 2, 2010 by Paul White

MR16 high output ultra bright LED 700 Lumen bulbOne of the more recent ongoing projects I have been working on is overhauling the Ritz Cabaret's Light Show.  This includes moving fixtures, finding and buying used fixtures off ebay, replacing bulbs, and programming everything to sync together with Martin Light Jockey.  However when you have 30 Intelligent Lighting fixtures that all take a 250 watt halogen bulb, you quickly do the math and realized that the Ritz Cabaret is spending a small fortune all to ensure its dancers look good on stage.  My goal was to upgrade all our fixtures to LED bulbs.  This is my story.

Read
1 Comments
1418 Visitors
2678 Views